Waterbased Enamel Semi Gloss

An ultra premium waterbased enamel in a semi gloss finish. Formulated to be used in place of traditional oil based enamels it has faster drying and non-yellowing properties, is low odour, and washes up in water. Ideal for trims, doors and window surrounds. Fast drying and non-yellowing.

• Typical uses: interior and exterior windows, doors and trim
• Ideal for: previously painted surfaces and new timber, Gib®, plaster, wallboard
• Coverage: 10-12m² per litre
• Sheen level: semi gloss 35% gloss

Aalto Ultra Premium Waterbased Enamel Semi Gloss can be applied by synthetic brush, roller, or spray.

Airless spray – a 412 or 413 tip is recommended. When spraying, Aalto Ultra Premium Waterbased Enamel Semi Gloss will need to be thinned to suit.
Rolling – a synthetic 8mm nap roller sleeve is recommended.

Because of the quick drying nature of Aalto Ultra Premium Waterbased Enamel Semi Gloss, in hot conditions it may be necessary to thin up to 5% with hot weather thinners.

Old enamels will require fine sanding to a uniform dull finish.

1. Ensure surfaces are dry and free from dirt, dust, oils, grease or other contaminants. If mould is present, treat with a suitable cleaner.
2. Fill any cracks or holes with a paintable filler. Allow to dry, and sand to a smooth finish.
3. Spot prime any repair work with Aalto 3 in 1 Undercoat
4. Stir paint thoroughly with a broad, flat paddle, using an up and down scooping motion.
5. Apply 2 coats of Aalto Ultra Premium Waterbased Enamel Semi Gloss, allowing 2 hours between coats.

For more detailed application details, please refer to product data sheet.